Contacts:
Fiona Fong
Mobile + WhatsApp:
+86 17718177652
+852 91232004
Email:
fangqi@ecolto.com
CTO: Morley.lee@ecolto.com
Safe 18650 LFP Rechargeable Cell 1500mAh Nail Puncture Passed 3.65V Cutoff
High Performance LFP 18650 Cell
The LFP18650-1500mAh is a cylindrical lithium iron phosphate cell with a nominal voltage of 3.2V and capacity of 1500mAh. Using LFP cathode and graphite anode, this cell delivers excellent cycle life (6,000 cycles at 80% retention), outstanding high rate capability (10C charge and discharge with 98% capacity retention), and superior safety (passes nail penetration, crush, short circuit, and overcharge tests). Housed in a standard 18650 format (18mm diameter, 65.5mm height), it is ideal for electric vehicle batteries, energy storage, power tools, and high power applications.
| Item | Condition |
| Temperature | 25±5℃ |
| Relative humidity | 15%–90% |
| Atmospheric pressure | 86kPa~106kPa |
| Height above sea level | ≤4000m |
Core Specifications
Nominal capacity is 1500mAh (1C at room temperature). Nominal voltage is 3.2V (average discharge voltage at 1C). Internal impedance is ≤20mΩ measured by AC 1kHz at 30% to 50% state of charge. Standard charge cut off voltage is 3.65V. Standard discharge cut off voltage is 2.0V. Maximum continuous charge current is 3C (4.5A) but note rate performance shows 10C charge capability (see below). Maximum continuous discharge current is 5C (7.5A) but also supports up to 10C for short durations. Operating temperature range is -30°C to 60°C for both charge and discharge (with reduced performance below 0°C). Storage temperature range is -20°C to 35°C. Weight is ≤44 grams. Dimensions: diameter 18±0.3mm, height 65.5±0.3mm.
| No. | Item | Condition | NOTE |
| 1 | Appearance | Consistent with appearance inspection standard | There should be no such defects as fiaw, crack, rust, leakage, which may depreciate the commercial value of cell. |
| 2 | Nominal capacity | 1500mAh | 1C room temperature≥1500mAh |
| 3 | Nominal voltage | 3.2V | 1C discharge average voltage at room temperature |
| 4 | Internal impedance | ≤20mΩ | Internal resistance measured at AC 1kHz after 30%~50% charged under room temp. |
| 5 | Standard charge cut-off voltage | 3.65V | / |
| 6 | Standard discharge cut-off voltage | 2.0V | / |
| 7 | Maximum continuous charge current | 3C (4.5A) | 25±5℃ |
| 8 | Maximum continuous discharge current | 5C (7.5A) | 25±5℃ |
|
9 |
Operating temperature range | Temperature: -30℃ to 60℃ Humidity: ≤85%RH | Recommended charge/discharge current: ≤1C. When the cell temperature is below 0°C, it is recommended to reduce discharge power or stop charging/discharging. When the cell temperature exceeds 50°C, appropriate thermal management is recommended. |
| 10 | Storage temperature range | -20℃ to 35℃ | IRecommended storage temperature: 25±3℃; ≤90%RH Relative Humidity |
| 11 | Weight | ≤44g | / |
Cycle Life
Under standard test conditions (1C charge/discharge, 100% DOD at room temperature), the cell retains ≥80% of initial capacity after 6,000 cycles. This long cycle life makes LFP suitable for daily deep cycling in EVs and stationary storage.
Rate Performance
Charge capacity at 3C, 5C, and 10C rates is ≥98% of initial capacity. Discharge capacity at 3C, 5C, and 10C rates is also ≥98% of initial capacity. This exceptional high rate capability allows fast charging (10C charges the cell in 6 minutes) and high power delivery without significant capacity loss.
Temperature Performance
At 0°C, charge capacity is ≥95% and discharge capacity ≥80% of initial capacity. At -20°C, charge capacity is ≥80% and discharge capacity ≥60% of initial capacity. This makes the cell suitable for moderate cold climates with appropriate thermal management.
Storage and Self Discharge
After 28 days storage at room temperature, residual capacity is ≥90% and recoverable capacity ≥95% of initial. After 7 days at 60°C, residual capacity is ≥92% and recoverable capacity ≥95% of initial. For long term storage, keep at 10% to 30% SOC in a clean dry room at -5°C to 28°C, recharge every 6 months.




Q :Do you provide free sample ?
A: Yes, a few pcs free sample can be provided, but freight will be charged
Q: what is the warranty?
A: one year
Q:What is your payment term ?
A: T/T,L/C
Q:do you accepte OEM order ?
A: Yes,you can print yourself logo, also we can provide the design of outlook for your special battery pack
Q :How many cells you can produce per month?
A: 1.8million
Q :What is the mode of transport?
A: usually by sea
Q:Which certificates do you have
A:We have un38.3,MSDS…etc.
Fill out our short form and we will be contacting you shortly to see we how can provide a solution to your needs!
This site is protected by wp-copyrightpro.com
![]()